Single, double-opposed or tandem configuration Series
Type 28EXP Series-Johncrane

Type 28EXP: The product for the most challenging and hostile environments with proven and independently audited performance to 425 bar(g). Type 28 compressor dry-running gas seals have been the industry standard since early 1970 for gas-handling turbomachinery. Utilizing John Crane’s patented spiral groove pattern, these seals are non-contacting in operation. During dynamic operation,
the mating ring/seat and primary ring/face maintain a sealing gap of approximately 0.0002"/5 microns, thereby eliminating wear. These seals eliminate seal oil contamination and reduce maintenance costs and downtime. Single, tandem and double seal arrangements are available.
Features
●Unidirectional or bidirectional capability
●Single, double-opposed or tandem configuration
●Robust design with unparalleled field-proven pedigree
●Cartridge design
Operating range
Size Limits: 350 mm (13.75")
Pressure Limits: 425 bar (6164 PSI)
Temperature Limits: -140 °C … +315 °C * (-220 °F … +600°F)
Speed Limits: 200m/s (660 fps)
*If parameters fall outside of these ranges, contact us to speak
Recommended applications
●Centrifugal compressors
●IG compressors
●Turbo compressor machinery
●Natural gas pipeline
●Natural gas/hydrogen refueling stations
●Oil and gas (refineries)
●API 692
●Propylene and ethylene compressor
Type 28AT

Type 28AT: The original gas seal, with a design pedigree stretching back over 30 years and evolving gradually, installed and proven in thousands of compressors all around the world and remaining the preferred seal choice for many customers. Type 28 compressor dry-running gas seals have been the industry standard since early 1970 for gas-handling turbomachinery. Utilizing John Crane's patented spiral groove pattern, these seals are non-contacting in operation. During dynamic operation, the mating ring/seat and primary ring/face maintain a sealing gap of approximately 0.0002"/5 microns, thereby eliminating wear. These seals eliminate seal oil contamination and reduce maintenance costs and downtime. Single, tandem and double seal arrangements are available.
Features
●Unidirectional or bidirectional capability
●Single, double-opposed or tandem configuration
●Robust design with unparalleled field-proven pedigree
●Cartridge design
Operating range
Size Limits: 308 mm (12.125")
Pressure Limits: 100 bar (1450PSI)
Temperature Limits: -20 °C … +200 °C * (-4 °F … +392°F)
Speed Limits: 120m/s (394 fps)
*If parameters fall outside of these ranges, contact us to speak
Recommended applications
●Centrifugal compressors
●Other compressors
●IG compressors
●Turbo compressor machinery
●Natural gas pipeline
●Natural gas/hydrogen refueling stations
●Oil and gas (refineries)
●API 692
●Propylene and ethylene compressor
Type 120NS

Aura®120 narrow section gas seals enable the latest John Crane gas seal technology to be fitted into older equipment, bringing with it the benefits of non-contacting design. Gas seal technology eliminates the need for oil lubrication associated with contacting seals and the resulting need to address harmful emissions trapped in the oil.
Investing in retrofitting oil seals to dry gas seal solutions will increase the reliability of compressors and other rotating equipment. The Aura® 120 narrow section design applies decades of retrofit experience to minimize upgrade costs and accelerate turnaround.
Oil and gas methane emissions are the second most important greenhouse gas source, accounting for ~18% of total climate human-related climate impact. Upgrading legacy compressors to dry gas seal technology can reduce methane emissions by up to 95 percent.
Features
●non-contacting design
Operating range
Size Limits: 73 mm to 155mm (2.87" to 6.10")
Pressure Limits: 120 bar (1740PSI)
Temperature Limits: -50 °C … +200 °C * (-58 °F … +392°F)
Speed Limits: Up to 100m/s (328 fps)
*If parameters fall outside of these ranges, contact us to speak
Recommended applications
●Centrifugal compressors
●Other compressors
●IG compressors
●Screw compressors
●Turbo compressor machinery
●Natural gas pipeline
●Natural gas/hydrogen refueling stations
●Oil and gas (refineries)
●API 692
●Propylene and ethylene compressor
Type 28XP

Type 28XP: Possibly the most popular seal in the range today, the Type 28XP builds on the 28AT design and seals medium to high pressures with improved chemical resistance. It can also operate over a wider temperature range and is increasingly the preferred product for large sizes, and for applications requiring slow roll and coast-down where dry gas (very low dew point) conditions and rotational speeds lower than the lift off speed of the gas seal create arduous contacting operation. Type 28XP seals are also available with Carbon LF™ primary ring material for improved friction and wear-resistance for contacting operation in dry gas (very low dew point) conditions.
Features
●Unidirectional or bidirectional capability
●Single, double-opposed or tandem configuration
●Robust design with unparalleled field-proven pedigree
●Cartridge design
Operating range
Size Limits: 350mm (13.75")
Pressure Limits: 180 bar (2610PSI)
Temperature Limits: -140 °C … +315°C * (-220 °F … +600°F) dependent on overall duty conditions
Speed Limits: 200m/s (660 fps)
*If parameters fall outside of these ranges, contact us to speak
Recommended applications
●Centrifugal compressors
●Other compressors
●IG compressors
●Turbo compressor machinery
●Natural gas pipeline
●Natural gas/hydrogen refueling stations
●Oil and gas (refineries)
●API 692
●Propylene and ethylene compressor
●Cryogenic
Type 28ST

Type 28ST combines proven rotating groove technology and high-temperature secondary seals to reduce steam leakage by nearly two orders of magnitude, as compared to traditional sealing devices, such as segmented carbon rings and labyrinths. This steam-lubricated, end-face cartridge seal reacts instantaneously and automatically to maintain a safe face gap despite sudden changes in operating conditions. A stable seal face gap, typically 0.0001" to 0.0002"/0.0025mm to 0.0051mm, is the result of specially designed rotating grooves, which pump steam radially inward into a nongrooved portion of the seal known as the "sealing dam."
Features
●Non-contacting
●Bearing oil steam contamination reduced.
●Support equipment eliminated.
●Reduced noise levels and hazards associated with leaking steam.
Operating range
Size Limits: 165mm (6.5")
Pressure Limits: 27.6 bar (400PSI)
Temperature Limits: -40°C … +400°C * (40°F … +750°F) dependent on overall duty conditions
Speed Limits: 122m/s (400 fps)
*If parameters fall outside of these ranges, contact us to speak
Recommended applications
●Turbo compressor machinery
●Steam turbines
Type 93AX Coaxial Separation Seal

John Crane’s Type 93AX is a next-generation coaxial separation seal engineered to deliver exceptional performance,
reliability and efficiency, in high-demand compressor applications.
Suitable for a wide range of applications in the energy and process industries, including challenging applications with high-pressure and temperature differences -25 °C ~ 180 °C. During loss of separation gas, the Type 93AX is designed to operate non-contacting for limited periods of time, until normal operation resumes. In case of a dry gas seal failure, the Type 93AX is designed to restrict process gas leakage for safer and more sustainable operation.
Features
●Non-contacting
●Separation gas (normally nitrogen or air) is injected through the stationary face into the sliding surface, forming a high stiffness film.
●Creates controlled leakage flows directed towards both inner and outer diameters of the seal.
●Optimised materials and design ensure minimal gas consumption and eliminates wear during operation.
Suitable for running with nitrogen separation gas, irrespective of dew point.
Operating range
Size Limits: 100mm to 225mm (4" to 8.85")
Temperature Limits: -25°C … +180°C * (-13°F … +356°F)
Speed Limits: Up to 145m/s (475 fps) (on inner balance diameter)
Pressure:
Separation gas operating differential pressure range: 2.5 to 4.5 bar/36 to 65 psi
Maximum sealing integrity: 70 bar/1015 psi
GASES: Air,Nitrogen
Vibration Levels: Compliance with API 617 and ISO7919-3
Standards: NACE, API 692
Recommended applications
●Oil and Gas: Upstream (offshore), Pipelines, LNG, Downstream
●Petrochemicals
●CCUS and Hydrogen
●Power generation